Christie DD1-WU80P, Service Manual

Page: 98 / 150

96
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 96 / 118
Communica
tion P
or
t
##
TCP
#23
TCP
#9715
? # # ##
#%
Network Control Port1 (Port: 23)
Port open
Click the
[Enable]
check box to open
[Network
Control Port1 (Port: 23)]
to use
TCP
#23.
„‘”“
Authentication
Click the
[Enable]
check box for the
[Authentication]
#
is required. „‘„“
Network Control Port2 (Port: 9715)
Port open
Click the
[Enable]
check box to open
[Network
Control Port2 (Port: 9715)]
to use
TCP
#9715. „‘”“
Authentication
Click the
[Enable]
check box for the
[Authentication]
#
is required. „‘”“
Command Contr
ol via the Netw
or
k
#Œ
%‹%
Network Control
Authentication Password
Enter the desired authentication password. ? # [Network Control Port1 (Port: 23)]
and
[Network Control Port2 (Port: 9715)]
.
„
Re-enter Authentication Password
Command Contr
ol via the Netw
or
k
Command contr
ol settings
[TCP
#23]
1. Command f
or
ma
t
Same as RS-232C communication, refer to RS-232C Communication command format.
2.
R
esponse code / Er
ror code
("h" shows hexadecimal)
Four of the response / error code used for
TCP#23 are the same as RS-232C
Communication (1)~(4). One authentication error reply (5) is added. (1)
ACK reply : 06h
Refer to RS-232C communication
.
(2)
NAK reply : 15h
Refer to RS-232C communication
.
(3)
Error reply : 1Ch + 0000h
Refer to RS-232C communication
.
(4)
Data reply : 1Dh + xxxxh
Refer to RS-232C communication
.
(5)
Authentication error reply : 1Fh + 0400h
When authentication error occurs, the projector returns the error code.
[TCP
#9715]
1. Command f
or
ma
t
The commands that some datum are added to the head and the end of the ones of
TCP#9715 are used.
Header
„
RS-232C command
Check sum
Connection ID
0×02
0×0D
13 bytes
1 byte
1 byte
[Header] 02, Fixed  ""@‘ &=!•!? @'È'„Q+H [RS-232C commands] Refer to RS-232C Communication command format. [Check Sum] This is the value to make zero on the addition of the lower 8 bits from the header to the checksum. [Connection ID] Random value from 0 to 255 (This value is attached to the reply data).
NO
TE

œ
#
* J'# code.
? #=