Christie DD1-WU80P, Service Manual

Page: 24 / 150

22
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 22 / 118
Troubleshooting for other Network problems (continued)
Problem ›? ?
"# *
Can't Install
"LiveViewer"
­›}#­ #
Windows Vista without any Service
*
>&*
PC.
The projected image is
rather slow compared
to that of the PC
The projector isn’t capable of
relaying dynamic images such
as PowerPoint® animation at full
speed.
Switching the priority to ‘Transmission
Speed’ under the options menu may
help to improve speed.
The compression rate being used
for transferring the images is too
low. Switching the priority to ‘Transmission
Speed’ under the options menu may
help to improve speed.
No Image Using screensaver with password.
The "LiveViewer" cannot send PC
screen data while using screensaver
with password.
Can't display the
movies correctly.
In some combinations of PC's video
card and application software,
the true image, especially movies
played by media player, might not
be transferred to the projector with
the “LiveViewer”.
If there is a video acceleration level
adjustment function in your application,
please try to adjust it.
Refer your application manual in detail.
The LiveViewer can't transfer movie
when DFMirage driver was installed. Remove DFMirage driver when you
need to display movie with LiveViewer.
"#
between the PC
and projector is
disconnected when
PC screen resolution
is changed during
"# *
*?=* #
connection might be disconnected
when PC screen resolution is
changed while displaying picture.
Please re-connect them.
“Connect button” after changing PC
screen resolution, or change display
resolution before connecting with the
“LiveViewer”.
Images contain lots of
interference.
The compression rate being used
for transferring the images is too
high. Try setting the priority to 'Image Quality'
in the “LiveViewer” Option menu. You
may experience a drop in speed.
Neither transparency
nor translucency
effects (Glass)
Using the “LiveViewer” with
Windows Aero® mode. The “LiveViewer” does not support
these features of Windows Vista Aero.
Others
- Information from the
projector to PC is not
correct or completed
- The projector does not
respond
- Image on screen is frozen.
Communication between the
*? # #
"#
# #
Try “NETWORK RESTART” in the
NETWORK menu.
NOTE:
It is recommended to refer the section “Troubleshooting” in the latest version of User’s Manual - Operating
¢"# ¢%« ­›}#­ #