Christie DD1-WU80P, Service Manual

Page: 47 / 150

45
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 45 / 118
6-18 Lens installation / removal procedures
1. Pull out the dust protector knobs to remove it.
2. Remove the front cover
Slide the front cover (the upper part) upward while pressing the front cover from the
underside and remove the front cover from the projector.
Then,
V
lide the front cover (the lower part) downward while pressing the front cover from
the upperside and remove the front cover from the projector.
Note

Keep the dust protector for future use.
Dust protector
Front cover
(upper part)
Front cover
(lower part)
3. Install the lens
(1) Remove the lens cap. Then turn the lens groove upward and install the lens into the
projector.
Lens cap (rear)
groove
Lens cap (front)
Caution
¾\ #
¾> #
this may lead to malfunction.
¾„
to malfunction.
3. Install the lens (continued)
(2) Support the lens, and move the lens lock lever to the upside (until the lens lock lever
clicks into the locked position).
Lens lock lever
Warning
¾
is securely mounted and that the lens does not move. If the projector falls
or topples over, it could result in injury or damage to the projector and the
surrounding things.
4. Attaching the front cover
Insert the front cover into the projector body.
Front cover
(upper part)
Front cover
(lowwer part)