Christie DD1-WU80P, Service Manual

Page: 23 / 150

21
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 21 / 118
Problem ›? ?
No image
The projector is not turned on. Is the projector’s lamp on?
The projector’s input source isn’t
switched properly.
Is the LAN port selected?
* #
##
cable is connected.
#
occurred.
?
sure no "ring" or "loop" connection is made
#
to.
Time is not displayed
correctly
Set the Date and Time in the NETWORK
menu of the projector.
The projector displays "2010/1/1
0:00" as the Date and Time in the
"# \ >? #
cut off because the projector has no
Set the Date and Time in the NETWORK
menu of the projector every time the
projector is turned on.
The time is not adjusted by the
Daylight Saving Time correctly. ? „&
Date/Time Settings with a web browser.
The projector cannot get the time
from SNTP server.
?
#
? &"*
in the Date/Time Settings with a web
browser.
The Time Difference is not
? „
the Current Date and the Current Time in the
Date/Time Settings with a web browser.
? "#
The projector
that you want
to connect to is
nowhere to be
found on the
list of available
projectors
*? «#
?# *?
and projector.
If you change the projector’s settings, turn
off the projector’s AC power and then turn it
on again. If you simply put the projector in
STANDBY power mode and then turn it on
#
Firewall software other than
Windows Firewall is installed in
your PC.
 # #
# ^
=”+‘›}#“
item list
=„##
“LiveViewer”
Can't communicate
*? ¬#
?# *?
and projector.
An access point is used, and your
PC is connected to the access point
via wireless LAN.
%# #
your PC or wireless LAN card to establish
## Q
to the manual of the PC or the card.
& #
# Change the security setting to allow
"LiveViewer" to use.
The number of PC connection
exceeds the limit (max. 50).
Try again after one of session is
@­›}#­
application)
(continued on next page)