33
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014)
Page 33 / 118
6-11 Related Messages
# #
Although these messages will be automatically disappeared in about several minutes, it will be
reappeared every time the power is turned on.
Message
Description
There is no input signal.
*
#$"""
?# # =
related settings.
=* # *
re-connect them.
The horizontal or vertical frequency of the input signal is not within
"
*
An improper signal is input.
*
The internal temperature is rising.
Turn the power off, and wait at least 20 minutes. After the projector has
# #
power on again.
\ ª
\ª\
+ª@
chapter
.)
\ >\% ª
( For details of ALTITUDE, refer to the User's Manual. The wrong setting
of ALTITUDE may cause damage to the projector itself.)
\ #
vents of projector?
The internal humidity is rising.
?©'· #
condensation. Too much humidity hinders cooling performance of ENGINE
assembly, and furthermore, may cause dew condensation inside the
#
!"""
* #
""""
section of this manual. After you
hours.
The LENS ID cannot be recognized.
* # "&
distortion in the BtoB connectors, and all the cable connections.
If the same massage is displayed, replace the LENS, whole ENGINE
assembly or MAIN PCB.
The button operation is not available.
? #
pressed, all button operations are not available under the following conditions.
While the lens is moving, button operation from the control panel or the
remote control might be ignored.
Pressing one of the buttons to call a signal input might be ignored (set at
SOURCE SKIP of the OPTION menu).
Summary of Contents for DD1-WU80P
Page 1: ...DWU951 DWX951 DXG1051 Service Manual 020 000674 01...
Page 2: ......
Page 149: ......
Page 150: ......
