95
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014)
Page 95 / 118
USB wireless adapter
LAN or
HDBaseT port
LAN or HDBaseT port
・
LAN cable (CAT-5e or greater)
or
・
For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
WIRELESS port
RS-232C Communica
tion
3. R
esponse code / Er
ror code
("h" shows hexadecimal)
(1)
ACK reply: 06h
When the projector receives the Set, Increment, Decrement or Execute
item by [T
ype], and it returns the code.
(2)
NAK reply: 15h
When the projector cannot understand the received command, the projector
returns the error code.
\
(3)
Error reply: 1Ch + 0000h
When the projector cannot execute the received command for any reasons,
the projector returns the error code.
\
(4)
Data reply: 1Dh + xxxxh
When the projector receives the GET
command correctly
, the projector returns
the response code and 2 bytes of data.
NO
TE
Q
manual for each devices, and connect them correctly with suitable cables.
#
command or data.
* J'#
other code.
# ##"
#\
? #=
+ ? #
code to the computer
.
When the projector connects to the network, the projector can be controlled with
RS-232C commands from the computer with web browser
.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table
.
Command Contr
ol via the Netw
or
k
Connection
1.
T
urn of
f the projector and the computer
.
2.
If you use wired LAN, connect the projector's
LAN
or HDBaseT
TM
port to the
¬>"
#>"%
#
\ #>"%&
wireless adapter into the
WIRELESS
port of the projector
.
3.
T
urn the computer on, and turn the projector on after the computer has
started up.
NO
TE
If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly
.
Command Control via the Network
Summary of Contents for DD1-WU80P
Page 1: ...DWU951 DWX951 DXG1051 Service Manual 020 000674 01...
Page 2: ......
Page 149: ......
Page 150: ......