Christie DD1-WU80P, Service Manual

Page: 85 / 150

83
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 83 / 118
Metal mesh
Insulating
sheet
M3x8 silver screw
Torque: 0.39-0.59Nm
Disassembling
1) Remove 3 screws to detach the lamp duct.
2) Remove 2 screws each to detach the LAMP1/2 DOWN
FAN and IRIS FAN.
3) Remove a screw to detach the metal mesh and the
insulating sheet.
䖃
LAMP1/2 DOWN FAN, IRIS FAN
T3x12 black screws
Torque: 0.68-0.88Nm
T3x12 black
screws
Lamp
duct
LAMP2
DOWN FAN
LAMP1
DOWN FAN
IRIS
FAN
Torque: 0.68-
0.88Nm
Wire LAMP1 DOWN FAN
cable beneath the lib and
through the groove.
LAMP1
DOWN FAN
Assembling
1) Put the metal mesh and the insulating sheet in place and screw down.
2) Put the LAMP1/2 DOWN FAN and IRIS FAN in place and screw down.
3) Put the lamp duct in place and screw down.
Wiring
Wire the cable of LAMP1/2 DOWN FAN and IRIS fan as below.
LAMP2
DOWN FAN
Ensure that the cables
are passed through this
hook before attaching
LAMP1 DOWN FAN.
LAMP1
DOWN FAN
10mm
60mm 40mm
[Folding guideline]
Using the dimensions below, bind the tape twice in the
center of the bundle to wrap it tightly around the wires.
Wire LAMP2 DOWN FAN
cables through here
LAMP1
DOWN FAN
LAMP2
DOWN FAN
180mm