Printed circuit boards and sensors
HS Series D13 Service Manual
104
020-000892-03 Rev. 1 (12-2019)
19. To re-install, follow these steps in reverse order.
Removing the I/O board
To remove the I/O board, complete the following steps.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Replacing the main board and media board
3. Remove the rear cover.
4. Remove the five M3 screws with a Phillips #1 screwdriver.
5. Flip the projector over.
6. On the bottom cover side, remove the hex screw with a M3 socket driver securing the I/O board
module.
7. Remove the four M3 screws with a Phillips #1 screwdriver securing the shielding.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......