Electronics
HS Series D13 Service Manual
86
020-000892-03 Rev. 1 (12-2019)
5. Remove the filter-R switch
harnesses from the clips.
6. Separate the filter-R switch and hold cover.
7. Replace the filter-R switch.
8. To re-install, follow these steps in reverse order.
Removing the AC detect switch
The AC detect switch provide the projector AC source change from 15A to 20A.
1. Remove the top cover.
2. Remove the main board top shielding.
Replacing the main board and media board
3. On the main board, unplug the AC detect connector.
4. Remove the rear cover.
5. Remove the front cover.
6. Remove the left-side cover.
7. Remove the two M3 screws with a Phillips #1 screwdriver.
8. Separate the AC detect switch and hold cover.
9. Replace the AC detect switch.
10. To re-install, follow these steps in reverse order.
Removing the pump and radiator module
To remove the pump and radiator module, complete the following steps.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......