Printed circuit boards and sensors
HS Series D13 Service Manual
106
020-000892-03 Rev. 1 (12-2019)
4. On the laser driver board, unplug the four connectors.
5. To separate the laser driver board from the heatsink, remove the four M3 screws with a Phillips
#1 screwdriver.
6. Replace the laser driver board.
7. Transfer the heatsink to the new laser driver board.
8. To re-install, follow these steps in reverse order.
Replacing the red
laser driver board
To remove the red laser driver board, complete the following steps.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Replacing the main board and media board
To LD board
To LVPS board
To D-Boad
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......