Printed circuit boards and sensors
HS Series D13 Service Manual
109
020-000892-03 Rev. 1 (12-2019)
Replacing the photo sensor board
To remove the photo sensor board, complete the following steps.
1. Remove the color wheel.
2. Remove the one M2.6 screw with a Phillips Jewelers screwdriver securing the photo sensor
board.
3. Replace the photo sensor board.
4. To re-install, follow these steps in reverse order.
Replacing the DMD board
To remove the DMD board, complete the following steps.
1. Remove the complete light engine.
Replacing the complete light engine
2. Remove the color wheel.
3. Remove the combiner module.
4. Remove the TEC module.
5. To separate the DMD board from the DMD module, remove the six M3 screws with a Phillips #1
screwdriver.
6. Remove the DMD board.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......