Optics
HS Series D13 Service Manual
83
020-000892-03 Rev. 1 (12-2019)
4. Remove the I/O board.
5. Remove the front cover.
6. Remove the left-side cover.
7. Remove the power supply module from the projector.
See
Replacing the DC 12V power supply
8. Remove the laser driver board.
9. Remove the complete light
engine.
Replacing the complete light engine
10. Remove the color wheel.
11. Remove the combiner module.
12. Remove the TEC module.
13. Remove the DMD board.
14. Remove the DMD.
15. Remove the DMD mask from the light engine module.
16. Replace
the light engine.
17. To re-install, follow these steps in reverse order.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......