Service setups
HS Series D13 Service Manual
35
020-000892-03 Rev. 1 (12-2019)
Running a mini USB port performance test
To perform the video performance test by mini usb port, complete the following steps.
1. Connect the projector and PC using a USB cable.
2. Switch the signal source to
Mini USB
.
3. From
My Computer
, execute the
Projector Autorun.exe
.
The image of PC is projected.
Completing a picture in picture/picture by picture
function test
Always perform the picture in picture/picture by picture function test after repairing the main board,
or upgrading the scalar firmware. If the performance is not normal, replace the main board (see
Replacing the main board and media board
1. On the IR remote keypad, press
Menu > Input Switching > PIP Menu
.
2. Set PIP/PBP Enable to
On
.
3. Ensure each item is functioning normally.
Performing a network function test on the
network port
The following browsers are supported for this test:
• Internet Explorer: IE8 for WinXP, IE9 or higher for Win7, and IE11 for Win8.1 or Win10 is
required.
• Chrome: Version 49 or higher is required.
• Firefox: Version 46 or higher is required.
• Safari: Not supported.
To perform the network function test, complete the following steps.
1. Record the projector IP address.
ID
Part name
Description
1
Test equipment
Video generator
2
Test signal
64 Gray RGBW
3
Inspection item
Mini USB port performance test
4
Inspection distance
1.8 to 2.2 m
5
Criteria
No abnormal color performance, line distortion, or noise exist on the screen
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......
