Printed circuit boards and sensors
HS Series D13 Service Manual
105
020-000892-03 Rev. 1 (12-2019)
8. Remove the five M3 screws with a Phillips #1 screwdriver securing the I/O board.
9. Replace the I/O board.
10. To re-install, follow these steps in reverse order.
Replacing the blue1 and 2
laser driver board
To remove the blue 1 and 2 laser driver board, complete the following steps.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Replacing the main board and media board
3. To separate the affected
laser driver board,
remove the corresponding two M3 screws with a
Phillips #1 screwdriver.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......
