Optics
HS Series D13 Service Manual
82
020-000892-03 Rev. 1 (12-2019)
9. Remove the complete light
engine.
Replacing the complete light engine
10. Remove the color wheel.
11. Remove the combiner module.
12. Remove the TEC module.
13. Remove the DMD board.
14. Take out the DMD module from light engine.
15. Release the DMD socket securing the DMD.
16. Replace the DMD.
When replacing the DMD module ensure that the new thermal pad is applied evenly.
17. To re-install, follow these steps in reverse order.
Replacing the light engine
To remove the light engine, complete the following steps.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Replacing the main board and media board
3. Remove the rear cover.
Replacing the light engine must be done in a clean room.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......