Projector covers and feet
HS Series D13 Service Manual
66
020-000892-03 Rev. 1 (12-2019)
3. Cut off the cable tie.
4. Remove the six M3 screws with a Phillips #1 screwdriver.
5. On the front shielding, remove the 3M tapes.
6. Remove the front shielding.
7. Remove the nine M3 screws with a Phillips #1 screwdriver securing the front cover module.
8. Remove the front cover from the projector.
9. Remove the front IR sensor board.
See
Replacing the front IR sensor board
10. Transfer the IR sensor board to the new front cover.
11. If required, replace the front cover.
12. To re-install, follow these steps in reverse order.
Removing the right-side cover
The right-side of the projector is determined by facing forward from rear of the projector.
1. Remove the top cover.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......
