Printed circuit boards and sensors
HS Series D13 Service Manual
98
020-000892-03 Rev. 1 (12-2019)
Replacing the rear IR sensor board
The rear IR sensor board receives command codes from the IR remote to control projector operation.
1. Remove the top cover.
2. Remove the main board top shielding.
Replacing the main board and media board
3. On the main board, unplug the rear IR connector.
4. Remove the rear IR sensor board from the hook of rear cover.
5. Replace the rear IR sensor board.
6. To re-install, follow these steps in reverse order.
Replacing the front IR sensor board
The front IR sensor board receives command codes from the IR remote to control projector operation.
1. Remove the top cover.
2. On the LED board, unplug the corresponding front IR connector.
3. Remove the corresponding front IR sensor board from the hook of front cover.
4. Replace the front IR sensor board.
5. To re-install, follow these steps in reverse order.
Rear IR
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......
