NVF5 Series User Manual
Chapter 4 Integral Keypad
Chapter 4 Integral Keypad
4.1 Integral Keypad Instructions
Figure 4-1-1 LED Integral Keypad
Table 4.1 Key Function Description of the Keypad
Key
Description
Long press PRG/S key
，
if the LED flash state is changed,then you
can loosen this function switch key.
PRG function
：
Enter and exit
parameters group in
parameter edit state
Shift function
：
In parameter edit
state,bit left shift
；
In main
interface,switch
display
parameters
Run Key
Stop key when normal state
；
Reset fault key when fault state
Increase key
（
Change parameter group No.
、
parameters and so on
），
When inverter is power on,you can use
▲key increase frequency
reference directly. Setting frequency changing rate can be changed
by parameter F0.12
Decrease key
（
Change parameter group No.
、
parameters and so
on
），
When inverter is power on,you can use
▼key decrease
frequency reference directly. Setting frequency changing rate can be
modified by parameter F0.12
- 26 -
