－
39
－
6. OPERATION/SETTING
6.1 Turning Power On/Off
[Pen type]
State of switch
Operation mode on power on
INDICATE
Pen
type
All ON
•
Recording mode
For indication and recording of all the pens.
Individually
ON
•
Individual pen recording mode
Pen of ON: recording mode
Pen of OFF: the instrument does not indicate/record and stands by at the left side
(standby state)
(If the instrument was set to recording mode on power off, stops at indicated position)
All OFF
•
Recording off
The instrument does not indicate and stands by at the left side.
Chart paper feeding stopped
Note: When “INDICATE” switch is switched to all off state, the RUN lamp and chart speed lamp blink.
Setting information and various statuses information of the
instrument is stored in the nonvolatile memory (EEP-ROM)
within the instrument.
When the setting information of the instrument is changed, the
alarm lamp blinks for about 3 seconds. When the status
information of the instrument is changed, the alarm lamp blinks
for about 1.5 seconds.
The conditions for nonvolatile memory information change are
described in each setting/operation item.
Blinking of Alarm Lamp
1st pen INDICATE
2nd pen INDICATE
3rd pen INDICATE
