－
15
－
2. INSTALLATION
2.4 Release of Shipping Status
(2) Handling on Reshipping
1. On reshipping, the inkpad/cartridge pen must be removed.
2. Pull put the inner unit. (Refer to 5.1 Inkpad Loading )
z
For the multi-point type, insert the fixing paper through under
the main shaft. as shown in figure right (Top view).
z
For the pen type, insert the fixing paper through under the
lowest part of the main shaft, just above the chart cassette as
shown in figure lower right (Top view: three pen specification).
3. Check that an inner unit lock lever is open (inner unit is fixed).
[Top view: dot-printing type]
Fixing paper
Main shaft (rotation shaft)
* Insert the fixing paper
through under the main
shaft.
Dotting mechanism
When this product is reshipped, pack it in the state same as
when it was delivered to you. If it is packed in the different
state, it may be damaged by shocks and others on
transportation.
Packing on Reshipping
When moving the dotting mechanism and pen mechanism,
hold the part which fixes and move it quietly. If it is moved by
force or moved holding other parts, it may be damaged.
When the dotting mechanism and pen mechanism are moved,
the chart paper lighting may shine; that is not abnormal.
Caution on Installation of Fixing Paper
[Top view: pen type (three pen specification)]
Fixing paper
The lowest part of the
main shaft
*Insert the fixing paper
through under the
main shaft (of the 1st
pen).
1st pen pen mechanism
