-
31
-
5. LOADING
5.2 Cartridge Pen Loading (For pen type)
[Pen type]
(1) Preparation
1. Preparation of Cartridge Pen
Take out the cartridge pen from the accessory box.
Inks are colored in advance by ink listed in the table below.
(2) Scale Plate and Pointer
Positions of scale plate and pointer (index) differ by each type.
[1 pen specification]
[2 pen specification]
[3 pen specification]
(3) Cartridge Pen Loading
1) Pen Replacement Mode
Pen replacement mode moves cartridge pen to the position
where is easy to load/replace the cartridge pen.
If each pen is at the position of 20 to 80% of recording range,
this operation is unnecessary. If the position of the each pen is
overlapped, remove from the 3rd pen and load from the 1st
pen.
1. Bring the cartridge pen DOWN by pulling down the pen lift lever
down located at right side of the inner unit.(refer to (4) Pen Lift
Lever operation mentioned later)
2. Turn the power ON. (refer to 6.1 Turning Power On/Off, 6.2
Operation/Setting Change)
3. While pressing down “
◄
”
key, press “ENTRY” key (Press two
keys simultaneously).
* Perform key operation while front cover is open.
4. Release “
◄
”
key and “ENTRY” key.
5. “RUN lamp” is off and pointer of the 1st pen, 2nd pen and 3rd
pen move to the position approx. 25%, 50% and 75% of the
scale plate (pen replacement mode).
Load/replace the cartridge pen at this state.
Type
Recording channel number and recording
color
1 pen
Red
2 pen
(1) Red (2) Green
3 pen
(1) Red (2) Green (3) Blue
Type and Recording Color
1st pen scale plate
1st pen pointer
2nd pen pointer
2nd pen scale plate
1st pen pointer
1st pen scale plate
When loading or replacing the cartridge pen, make sure to turn
the power off, be in the state of RECORD OFF (all pens are
INDICATE OFF) or perform under the pen replacement mode.
Otherwise the dotting mechanism operates during cartridge pen
replacement and unexpected force is applied to the mechanical
parts then the instrument may be damaged.
Attachment/removal of Cartridge Pen
2nd pen pointer
2nd pen scale plate
3rd pen pointer
1st pen index
1st pen scale plate
3rd pen scale plate