－
13
－
2. INSTALLATION
2.3 Mounting Method on Panel
(1) Panel Cutout Size
Standard mounting
Min. clearance for mounting multiple units
Unit: mm
Unit: mm
(2) Mounting Method
1. Insert this instrument into the cutout from the front of the panel.
2. Screw lightly the attached fixing screws into the screw holes
(one hole in each side) of both sides of the case (Figure
below).
3. Insert the hexagon head of the mounted fixing screws into the
round hole of the attached mounting brackets from the both
sides of the case.
4. Like the figure below, slide down the mounting bracket, press
this instrument to the panel from the front for close attachment,
and tighten up the fixing screws with the attached screw
wrench (tightening torque: 2 N
･
m Figure right).
* The mounting bracket differs between ones for the right and
the left.
The mounting bracket in the figure above is for the right
side from the front.
Fixing screw
Slide down the mounting
bracket.
Panel
Fixing screw
Mounting bracket
Panel thickness (2 to 6 mm)
360
360
Panel cutout
281
±1
Panel cutout
281
±1
For mounting the instrument on a panel, it must be carried
out by two persons or more for safety.
Panel Mounting of Instrument
Use it by mounting it on a panel installed indoor.
Use a panel of steel plate with the thickness of 2 to 6mm or a material with equivalent strength.
Select the thickness of the panel to be used according to weight and depth of the instrument and panel structure.
Use This Instrument by Mounting It on a Panel.
