manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 99

2-31

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord. 

The cord is located on the driver’s side of the engine
compartment, near the power steering fluid reservoir.

3. Plug it into a normal, grounded 110

-

volt AC outlet.

CAUTION:

Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the wrong
kind of extension cord could overheat and cause
a fire. You could be seriously injured. Plug the
cord into a properly grounded three

-

prong

110

-

volt AC outlet. If the cord won’t reach, 

use a heavy

-

duty three

-

prong extension cord

rated for at least 15 amps.

4. Before starting the engine, be sure to unplug and

store the cord as it was before to keep it away 
from moving engine parts. If you don’t, it could 
be damaged.

How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead of
trying to list everything here, we ask that you contact
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands