manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 219

4-8

Let’s say the road is wet and you’re driving safely.
Suddenly, an animal jumps out in front of you. 
You slam on the brakes and continue braking. 
Here’s what happens with ABS:

A computer senses that wheels are slowing down. If one
of the wheels is about to stop rolling, the computer will
separately work the brakes at each front wheel and at
both rear wheels.

The anti

-

lock system can change the brake pressure faster

than any driver could. The computer is programmed 
to make the most of available tire and road conditions.
This can help you steer around the obstacle while 
braking hard.

As you brake, your computer keeps receiving updates on
wheel speed and controls braking pressure accordingly.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands