manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 190

2-122

Low Washer Fluid

This message is displayed
when the vehicle is low on
windshield washer fluid.
The message is only
displayed for 15 seconds 
at the start of each 
ignition cycle.

For more information see, “Windshield Washer Fluid” 
in the Index.

Cargo Lamp On

This message is displayed
when the cargo lamp is
turned on and the ignition
key is turned to RUN.

Low Fuel

This message is displayed
when your vehicle is low 
on fuel.

Refer to the fuel gage for a better indication of the
amount of fuel remaining in the fuel tank.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands