Chevrolet 2002 Avalanche Owner'S Manual Download Page 365

Page: 365 / 437

6-42

Taillamps

A. Stoplamp

B. Turn Signal Lamp

C. Back

up Lamp

1. Open the tailgate.

2. Remove the two

rear lamp assembly
screws near the tailgate
latch and pull out the
lamp assembly.

3. Press the release tab

and turn the bulb
socket counterclockwise
to remove it from the
taillamp housing.

4. Pull the old bulb straight out from the socket.

5. Press a new bulb into the socket and turn the socket

clockwise into the taillamp housing until it clicks.

6. Reinstall the rear lamp assembly and tighten the screws.

7. Close the tailgate.

Summary of Contents for 2002 Avalanche





















































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Avalanche

Reviews:

Brands by name

Popular brands

Chevrolet 2002 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2002 Avalanche

Reviews:

Brands by name

Popular brands