manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 234

4-23

Driving Uphill

Once you decide you can safely drive up the hill, you
need to take some special steps.
D Use a low gear and get a firm grip on the 

steering wheel.

D Get a smooth start up the hill and try to maintain

your speed. Don’t use more power than you need,
because you don’t want your wheels to start spinning
or sliding.

D Try to drive straight up the hill if at all possible. 

If the path twists and turns, you might want to 
find another route.

CAUTION:

Turning or driving across steep hills can be
dangerous. You could lose traction, slide
sideways, and possibly roll over. You could be
seriously injured or killed. When driving up hills,
always try to go straight up.

D Ease up on your speed as you approach the top of 

the hill.

D Attach a flag to the vehicle to make you more visible

to approaching traffic on trails or hills.

D Sound the horn as you approach the top of the hill 

to let opposing traffic know you’re there.

D Use your headlamps even during the day. They make

you more visible to oncoming traffic.

CAUTION:

Driving to the top (crest) of a hill at full speed 
can cause an accident. There could be a drop

-

off,

embankment, cliff, or even another vehicle. 
You could be seriously injured or killed. As you
near the top of a hill, slow down and stay alert.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands