manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 85

2-17

6. Turn both glass lock knobs (D), located at both top

corners of the storage pocket, to the locked position.
You may need to push the corner of the rear glass to
allow the lock knob to engage more easily.

Once both glass lock knobs are in the locked
position, the rear glass is securely stored.

7. Push both latch levers up to the locked position. 

You should hear a click when each latch lever 
locks correctly.

Rear seats can be returned to the normal position
when the rear glass is out and stored properly in the
storage pocket.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands