Chevrolet 2002 Avalanche Owner'S Manual Download Page 306

Page: 306 / 437

5-22

2. Remove the wheel blocks by turning the wing

nut counterclockwise.

3. Release the bottle jack from its holder by turning the

knob on the jack counterclockwise to lower the jack
head from the bracket.

The tools for changing a flat tire are located in the
passenger’s side Top

Box Storage unit.

To remove the tools, do the following:

1. Open the top door on the passenger’s side Top

Box

Storage unit. Use the ignition/door key to unlock it if
it is locked. See “Top Box Storage” in the Index for
more information on the Top

Box Storage unit.

Top Box Storage Unit (Passenger Side)

Summary of Contents for 2002 Avalanche





















































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Avalanche

Reviews:

Brands by name

Popular brands

Chevrolet 2002 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2002 Avalanche

Reviews:

Brands by name

Popular brands