manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 151

2-83

7. Push the latches away from you (start with the left

latch) to lock the panel in place. You should hear a
click when each latch locks correctly.

All-Weather Cargo Area

Your vehicle is designed to operate in many different
configurations (cargo panels on or off, Midgate up or
down) and is equipped with features that will help the
vehicle resist the elements. Some of the features that
help with this include the top drain grates, side rail
channels, Midgate drain and cargo area floor drains.
Depending on the conditions in which the vehicle is
used, you may need to perform some maintenance to 
the top drain grates, side rail channels, Midgate drain
and cargo area floor drains. This will help ensure that
they operate properly.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands