manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 313

5-29

Rear Position 

1500 Series

Rear Position 

2500 Series

On all 1500 Series vehicles, use the jacking pad
provided on the rear axle. On 2500 series vehicles, 
use the axle between the spring and shock bracket.

2. Make sure the jack head is positioned so that the rear

axle is resting securely between the grooves that are
on the jack head. Turn the wheel wrench clockwise
to raise the vehicle. Raise the vehicle far enough off
the ground so there is enough room for the spare tire
to fit back underneath the rear of the vehicle.

3. Remove all the wheel

nuts and take off the 
flat tire.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands