manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 266

4-55

Q:

What is front axle reserve capacity, and how 
do I calculate it?

A:

Front axle reserve capacity is the difference
between your front GAWR and the front axle
weight of your truck with full fuel and passengers.
Basically, it’s the amount of weight you can add to
your front axle before reaching your front GAWR.

The front axle reserve capacity for your vehicle 
can be found in the lower right corner of the
tire/certification label.

In order to calculate the amount of weight any front
accessory, such as a snow plow, is adding to the
front axle, use the following formula:

(W x (A + W.B.))/W.B.= Weight the accessory is
adding to the front axle.

Where:
W=Weight of added accessory
A=Distance that the accessory is in front of the
front axle
W.B.=Vehicle Wheelbase

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands