manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 121

2-53

Exterior Lamps

The parking/headlamp knob is located on the driver’s
side of the instrument panel.

 (Parking Lamps): Turn the knob clockwise 

to the parking lamps symbol to manually turn on 
the following:
D Parking Lamps
D Sidemarker Lamps
D Taillamps
D License Plate Lamps
D Instrument Panel Lights

 (Headlamps): Turn the knob clockwise to the

master lamps symbol to turn on all the lamps listed as
well as the headlamps.

 (Off): Turn the knob all the way counterclockwise to

turn off your lamps and put the system into automatic
headlamp mode.

You can switch your headlamps from high to low beam
by pulling on the turn signal/high

-

beam lever.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands