manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 144

2-76

Cargo Panel Storage System

The three cargo panels can be stored on either the
driver’s or passenger’s side of the cargo box using the
storage bag. To store the panels, do the following:

1.

Secure the storage
bag in the cargo
storage area by
attaching the 
four clips on the
cargo bag to the
tie

-

down locations

on either side of 
the storage area.

It is very important that you use the storage bag to
restrain the cargo panels during driving.

Before storing the cargo panels, be sure that the
latches are in the closed (locked) position. The latches
are in the closed (locked) position when they are
parallel to the front and back edge of the panel.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands