manualshive.com logo in svg

Chevrolet 2002 Avalanche, Owner'S Manual

Share
Download
Chevrolet 2002 Avalanche Owner'S Manual Download Page 187

2-119

Low Coolant

This message is displayed
when the cooling system 
is low on coolant.

The engine may overheat. See “Engine Coolant” in the
Index and have your vehicle serviced as soon as you can.

Check Coolant Temp

This message is displayed
when the cooling system
temperature gets hot.

Check the coolant temperature gage and the coolant
level. See “Engine Coolant” and “Engine Coolant
Temperature Gage” in the Index. See “Engine
Overheating” in the Index for further information.

Engine Overheated

This message is displayed
when the cooling system
temperature gets too hot.

This message will be displayed after the air conditioning
system has automatically turned off for the engine
coolant protection mode. See “Engine Overheating” 
in the Index for further information.

Summary of Contents for 2002 Avalanche






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands