200 CHASSIS ELECTRICAL
Location of horizontal (1) and vertical (2) adjust-
ment screws
Headlamp assembly—1968-82
4. Remove the retaining ring and discon-
nect the sealed beam unit at the wiring con-
nector. On 1984 models, rotate the right
headlight clockwise and the left headlight
counterclockwise to release it from the aim-
ing pins.
5. When installing the sealed beam unit
make sure the number which is moulded into
the lens is at the top. The number 1 inboard
unit takes a double connector plug and the
number 2 outboard unit takes a triple con-
nector plug.
NOTE:
Disconnect the headlight motor
Headlamp assembly—1984 and later models
SUPPORT
HDLP ASM
