Chattanooga Intelect Advanced Therapy System Manual Download Page 91

Page: 91 / 120

Intelect® Advanced Therapy System

OPERATION

CLINICAL RESOURCES LIBRARY CREATING NEW SEQUENCES (continued)

Edit First Waveform or Current

Press the Edit button on the Sequence
screen.
Press the Edit button on the waveform/
current Treatment Review screen.

EDIT

BUTTON

EDIT

BUTTON

Edit waveform or current as prescribed.
Press the Back button twice to go back to
the Sequence screen.

Select Second Waveform or Current

Press the Down Arrow button on the
Sequence screen to highlight the next
waveform in the Sequence.

DOWN
ARROW
BUTTON

Repeat steps used in selecting and editing
first waveform/current for second and third
waveform/current.

Saving New Sequence

After all waveforms/currents have been

selected and edited as prescribed, press the

Save button on the Sequence screen.

SAVE

BUTTON

Supplied by EME Services Ltd

Summary of Contents for Intelect Advanced Therapy System

























































































































Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands

Chattanooga Intelect Advanced Therapy System, Manual

Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands