Chattanooga Intelect Advanced Therapy System Manual Download Page 86

Page: 86 / 120

Intelect® Advanced Therapy System

OPERATION

CLINICAL RESOURCES LIBRARY USING USER PROTOCOLS

Access User Protocols

Press the Clinical Resources Library button.
Press the User Protocols button.

USER

PROTOCOLS

BUTTON

Press the UP and Down Arrow buttons until the
prescribed User Protocol is highlighted.

Press the Accept and Return Arrow button.

Select User Protocol

UP ARROW

BUTTON

DOWN ARROW

BUTTON

ACCEPT AND

RETURN ARROW

BUTTON

Press the Waveform Rationale button
(Electrotherapy Modalities) or the Parameter
Rationale (Ultrasound Modality) button
to view the text explaining the rationale
for the modality associated with the User
Protocol selected.

Press the Back button to return to the
Treatment Review screen.

View Waveform Rationale

WAVEFORM RATIONALE
BUTTON

BACK
BUTTON

Supplied by EME Services Ltd

Summary of Contents for Intelect Advanced Therapy System

























































































































Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands

Chattanooga Intelect Advanced Therapy System, Manual

Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands