Chattanooga Intelect Advanced Therapy System Manual Download Page 50

Page: 50 / 120

Intelect® Advanced Therapy System

OPERATION

Give Patient Interrupt Switch to patient
and explain that pressing the Red button
once pauses the therapy session.

GENERAL ELECTROTHERAPY WAVEFORM SET UP (continued)

Patient Interrupt Switch

Set intensity by rotating the Intensity Control
Knob to the prescribed level.

Set Waveform Intensity

PRESSING BUTTON ONCE PAUSES SESSION

INTENSITY
DISPLAYED

ROTATE
INTENSITY
KNOB

Clockwise-

Increases Intensity

Counterclockwise-

Decreases Intensity

Intensity Knob Rotation

If Patient Interrupt Switch is depressed, the
treatment will be paused and a message
will appear on the System screen.
Press any button to clear the message.

NOTE:

If the Patient Interrupt Switch is depressed
a second time, the message will clear from
the screen and the treatment will remain
paused.

Start Treatment

Press the Start button to begin therapy
session.

START
BUTTON

Supplied by EME Services Ltd

Summary of Contents for Intelect Advanced Therapy System

























































































































Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands

Chattanooga Intelect Advanced Therapy System, Manual

Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands