Chattanooga Intelect Advanced Therapy System Manual Download Page 100 | Manualshive

Page: 100 / 120

background image

Intelect® Advanced Therapy System

95

INSTALLATION/REMOVAL

INSTALLATION CHANNEL 3/4 ELECTROTHERAPY MODULE

General Information

The Intelect Advanced Therapy System Channel 3/4 Electrotherapy Module is a two channel electrotherapy module intended to upgrade
the Intelect Advanced Therapy System Two Channel Electrotherapy and Two Channel Combination Therapy Systems to Four Channel
Electrotherapy or Combination Therapy Systems. This module is designed for use with the Intelect Advanced Therapy Systems only.

Read, understand, and follow all precautionary instructions found on pages 2 through 6, and throughout this manual as indicated,
before performing any installation or removal of optional modules and accessories.

Perform all optional module and accessory installation and removal procedures as described in this manual. Failure to follow these
explicit instructions could cause permanent damage to internal components of the equipment and render the system unsafe for
patient therapy.

Understand all symbols and their definitions before operating or performing any installation or removal of optional modules and
accessories. The Symbol Definitions are on pages 2 and 13 of this manual.

Follow all safety precautions before, during, and after any treatment.

Read, understand and follow the indications, contraindications, and adverse effects of the modalities associated with this system found
on pages 7 through 9 of this manual before administering any treatment.

Keep informed of appropriate indications and contraindications for the use of all modalities utilized with this Therapy System.

This system, optional modules, and accessories are to be used and sold only under the prescription and supervision of a physician or
licensed practitioner.

•

•

•

•
•

•
•

DISCONNECT THE SYSTEM FROM THE POWER SOURCE (OUTLET OR
REMOVE BATTERY MODULE IF INSTALLED) BEFORE ATTEMPTING
ANY MAINTENANCE, INSTALLATION, REMOVAL, OR REPLACEMENT
PROCEDURES TO PREVENT ELECTRICAL SHOCK AND POSSIBLE
DAMAGE TO SYSTEM.

Supplied by EME Services Ltd

«
...
98
99
100
101
102
...
»

Summary of Contents for Intelect Advanced Therapy System

























































































































Reviews:

No comments

Related manuals for Intelect Advanced Therapy System

Brand: Daavlin Pages: 13

Brand: Daavlin Pages: 27

Brand: Walker Bay Pages: 8

Brand: 1010music Pages: 2

Brand: 1010music Pages: 4

Brand: Tascam Pages: 80

Brand: Tascam Pages: 2

Brand: Walker Pages: 24

Brand: GALBIATI Pages: 20

Brand: Bard Pages: 36

Brand: Bard Pages: 2

Brand: Bard Pages: 30

Brand: Bard Peripheral Vascular Pages: 44

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

Brand: Ocmis Irrigazione Pages: 100

Brand: Taylor Pages: 41

Brand: Tascam Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands