Chattanooga Intelect Advanced Therapy System Manual Download Page 59

Page: 59 / 120

Intelect® Advanced Therapy System

OPERATION

QUICK LINK INDICATIONS (continued)

Make certain the Patient Interrupt Switch is
connected to the unit. Refer to page 13 for
Symbol Definitions.

NOTE:

When reinstalling the Front Access Panel,
make certain the Lanyard does not become
kinked.

Install Patient Interrupt Switch

LANYARD

PATIENT
INTERRUPT
SWITCH

Give Patient Interrupt Switch to patient
and explain that pressing the Red button
once pauses the therapy session.

Patient Interrupt Switch

PRESSING BUTTON ONCE PAUSES SESSION

If Patient Interrupt Switch is depressed, the
treatment will be paused and a message
will appear on the System screen.
Press any button to clear the message.

NOTE:

If the Patient Interrupt Switch is depressed
a second time, the message will clear from
the screen and the treatment will remain
paused.

Reset intensity and press the Start button
to resume session.

START
BUTTON

Supplied by EME Services Ltd

Summary of Contents for Intelect Advanced Therapy System

























































































































Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands

Chattanooga Intelect Advanced Therapy System, Manual

Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands