Chattanooga Intelect Advanced Therapy System Manual Download Page 82

Page: 82 / 120

Intelect® Advanced Therapy System

OPERATION

Start Treatment

Press the Start button to begin therapy
session.

Pause Treatment

Press the Pause button to pause therapy
session and maintain remaining time. To
resume treatment, press the Pause button
again.

Stop Treatment

To Stop treatment, press the Stop button
once. Treatment will stop and the Home
screen will display.

CLINICAL RESOURCES LIBRARY CLINICAL PROTOCOLS™ (continued)

NOTE:

Modality parameters may be editied at any
time during the therapy session. Refer to
page 47 for Electrotherapy and page 51 for
Ultrasound.

Save to Patient Data Card

After session is complete, press the Save
to Patient Card button. Refer to pages 63
through 72 for Patient Data Card Setup
and use.

START

BUTTON

PAUSE
BUTTON

STOP BUTTON

Supplied by EME Services Ltd

Summary of Contents for Intelect Advanced Therapy System

























































































































Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands

Chattanooga Intelect Advanced Therapy System, Manual

Search results

Summary of Contents for Intelect Advanced Therapy System

Reviews:

Related manuals for Intelect Advanced Therapy System

Brands by name

Popular brands