Challenge TITAN 265 XG, Operator'S Manual

Page: 32 / 52

6.0 Operation
32
6.16.3.1 Error Code
The Error Code function simply recalls the last five error messages that were displayed. This can be
very useful in cases when the malfunction cannot be reproduced in the presence of the service
technician.
6.16.3.2 Sensor Data
The Sensor Data function provides a list of computer inputs and outputs (proximity switches, etc.)
along with their status (0 for open, 1 for closed). This function allows a service technician to check
the status of a switch without removing any covers. Cuts and backgauge movements are allowed in
this screen so that the technician may observe the status of the inputs and outputs during machine
operation.
6.16.3.3 Clear Memory
The Clear Memory function resets the memory to a known state. All cut positions will be erased
during this operation.
6.16.3.4 Knife Adjust
The knife adjust function provides a way for the service technician to change the knife. In the Knife
Adjust screen, use the up and down arrow keys to toggle to the up or down status as desired, and
press ENTER. Press and hold the cut buttons to send the knife to the desired position.
6.17 Job Mode
The Titan 265 XG can be programmed for up to 99 different jobs. A job is a sequence of
programmed cut positions. The backgauge moves to each position after a cut cycle is made. Each
job can hold up to 99 send values. Job mode is entered by pressing soft-key “F”. When the job mode
is entered, all previously programmed jobs will be displayed along with their name and lock status.
Locked jobs display the word “Lock” after their name. A plus “+” sign at the bottom of the screen
indicates there are more jobs programmed than what are displayed. Pressing the left arrow key and
the down arrow key simultaneously will page down to the next set of jobs. Page 59 contains an
example of how to program a job.
Clamp
Pressure
| | | 14 | | |
-------------------------------
C)
Up
D) Down
>
1>JOB 1
2>TESTJOB
5>
6>BOBS
JOB Lock
7>8.5 X 11 Lock
9>
10>
+
E)
Lock G) Erase
F) Copy H) Exit