6.0 Operation
24
Figure 18
Figure 19
6.6 Adjusting the Clamp Pressure
The clamp pressure can be adjusted by pressing soft-key “C” (Up) to increase the pressure, and soft-
key “D” (Down) to decrease the pressure. The pressure scale ranges from 0 to 15, 15 being the
maximum.
6.7 Pre-Clamping
The Titan 265 is equipped with a low-pressure clamping feature, which allows the operator to clamp
paper under low pressure before beginning the cut cycle. To use this feature, press down on the foot
switch located at the front of the machine until the clamp comes down on the paper. To raise the
clamp, release the foot switch. To make a cut, keep the foot switch pressed and press the cut
buttons. Release the foot switch once the cut has been completed. Avoid placing hands under the
clamp.
Summary of Contents for TITAN 265 XG
Page 47: ...7 0 Knife Installation Changing 47 NOTES...
Page 52: ...F 265XG EO January 2014...
