CF MOTO CF125T-19 2003, Service Manual

Page: 81 / 241

5-7
5 carburetor air filter secondary air inlet
5
Assembly of carburetor
Assemble following parts
-Low-speed jet
-
main noain jet
-o-ring/washer/spring /mixture ratio screw
Note
Screw the mixture ratio screw to till it slightly
contacts valve base, screw back according to
the turns of disassembly.
Assemble float valve, float and float pin.
Checking the oil level
Note
Fuel level gauge should be vertical against the float
chamber mounting surface, and measure the distance
to main measuring hole.
Incline carburetor so that the top end of float valve
slightly contacts the float arm lip.
The float valve should be united tightly with valve
socket.
Measure oil level with fuel level gauge.
Required oil level: 30
±
0.5mm
Replace float when the oil level is above the required
level.
Check O-ring and assemble float chamber.
Tighten float chamber with four screws.