CF MOTO CF125T-19 2003, Service Manual

Page: 106 / 241

7-6
CFMOTO
Install rear brake caliper comp., and tighten bolt1
and bolt2 to the specified torque.
Torque:30N
·
m(3.1kgf
·
m)
Install rear brake hose comp., tighten bolt3 and bolt4.
Note
Rear brake hose should be fitted properly,
and it should not be intervened with rear wheel,
rear brake disk and other parts.
Install water outlet pipe, water inlet pipe and small
cycling water pipe, and tighten with clamp
accordingly.
Note
There should not be any cracks or other dam-
ages with each water pipe.
There should be no leakage or seepage with
the joint parts of the water pipes and hoses.
Connect throttle cable, and adjust throttle handle
gap. (3-15)
Lock the locknut after adjusting the gap.
Install starting motor positive terminal and negative
terminal.
Install breather hose of secondary air inlet system,
and tie it with tiedown band.