CF MOTO CF125T-19 2003, Service Manual

Page: 232 / 241

18Light, Instrument, Switch
18
18-11
Remove fuel sensor 2p coupler
Connect universal meter between fuel sensor 2p
coupler terminals.
Rock fuel sensor float with hand, and measure
resistance of each position.
Connection terminal: yellow/white-green
Float position: up:10
±
2
Ω
(20
℃
)
Down: 90
±
4
Ω
below(20
℃
)
Replace the fuel sensor in case of any problems
found.
Installation
Press fuel sensor into fuel tank installation hole,
install it properly and there should be no fuel
leakage or seepage.
Connect fuel sensor 2p coupler.
Inspection of fuel level gauge
Switch on power supply, check if fuel level
gauge performs normally.
If fuel level gauge works normally, reverse the
removal procedure for installation of plastic parts
and seats.