CF MOTO CF125T-19 2003, Service Manual

Page: 204 / 241

15 Battery Charging system
15
15-5
Connect charger ’ positive harness with battery ’ s
positive terminal.
Connect charger
’ negative harness with battery ’ s
negative terminal.
Charging current/time: standard: 0.9A/5-
10hours
Fast charge: 4A/60mins
Notes
• Keep the battery ’ s liquid temperature under than
45
℃
. Reduce current to adjust the temperature if it
is too high.
• Fast charge will reduce battery ’ s life of use and
damage the battery. Do not use fast charge except
for emergency case.
Inspect charging system
Inspect charging situation
Remove battery (15-4) and install a fully charged
battery.
Keep ignition switch in the
“ OFF ” position.
Connect voltmeter between battery ’ s terminals af-
ter engine is started and warmed up.
Notes
• Do not cause short circuit when measuring.
• Keep ignition switch at the “ OFF ” position.
• Use a fully charged battery for inspection.
Start engine and turn on high beam.
Increase engine speed slowly. Inspect voltage of
battery
’ s terminals which is usually between 13.5-
15V, when the speed reaches specified speed
(5000r/min),.
Standard:
Battery ’ s monomer voltage<charging voltage
<15V (5000rpm)
Electric leakage test
Remove battery cover (2-2)
Keep ignition switch at the
“ OFF ” position, and re-
move negative harness from battery.