CF MOTO CF125T-19 2003, Service Manual

Page: 54 / 241

3-6
CFMOTO
Brake pump comp.
<Fluid level>
Check the brake fluid level
When the brake fluid level is near to the lower limit
line, check brake pump, brake hoses and leakages
at the joints.
Remove the two mounting screws on oil cup cap,
take down the cap, add DOT3 or DOT4 brake
liquid till the upper limit line.
l Do not mix with dust or water when adding brake
fluid.
l Use only the recommended brand of brake fluid
to avoid chemical changes.
l Brake fluid may cause damages to the surface of
the plastic and rubber parts. Keep the fluid away
from these parts.
l Slightly turn the handlebar left and right till the
brake pump comp. Is in the horizontal status, then
remove the oil cup cap.
Brake disk, Brake flake
< Wear of brake flake >
Check the brake flake r from the mark as indicated.
Replace the brake flake If the wear has reached
position of wear limit trough.
Note
The brake flake must be replaced with a whole
set.
Check and replacement of the brake disk.
Check is there is any were or damage on the disk,
when the brake disk thickness is
¡Ü 3 mm, replaced
in the brake disk.
Min. limited thickness of the brake disk: 3mm
Replacement of Oil
< Replacement of brake liquid>
Replace the brake liquid once every year.