CF MOTO CF125T-19 2003, Service Manual

Page: 60 / 241

3-12
CFMOTO
I nstall the cleaned drain bolt and new sealing gasket,
and tighten it according to the recommended torque.
Torque: 25N.m(2.5kgf.m)
Add the recommended engine oil.
Engine oil capacity: 0.8 L (for replacing)
1.0 L (for disassembling)
Check the oil level with the dip rod while adding till
the oil level reached the upper limit.
Install the oil dip rod, start the engine, and check if
there is any oil leakage.
Stop the engine, and check oil level again.
Washing of the oil filter
Drain the engine oil.
Remove the engine oil filter cover.
Remove the spring, filter, and wash the filter net.
Check O-ring of filter cover, if necessary, replace
with a new one.
Install filter net and spring, tighten the engine oil fil-
ter net cover to appointed torque
Torque: 20N.m(2.0kgf.m)
Fuel device
Status of the fuel system
Check the oil pipe for any aging or damage.
In case of any aging or damage with the fuel pipes,
replace with new ones.
Check if there is cracks or bending with the vacuum
tube. Replace with a new one, if any.